|
Fabreeka®-LTP Crane Rail Pads
The body of the Fabreeka® CR17-5 Crane Rail pad is composed of multiple layers of prestressed duck impregnated and bound with an oil impervious Butadiene Acrylonitrile elastomeric compound and is scientifically designed and manufactured. The body of the Fabreeka® CR2-3 Crane Rail pad is a fabric reinforced oil resistant elastomer. Both types of pad can withstand loads of up to 12,000 psi before breakdown.
The LTP surface consists of fabric laminations impregnated with a synthetic phenolic resin vulcanized under heat and pressure.
|
|
 |
The LTP surface is integrally molded to the crane rail pad body under scientifically controlled manufacturing procedures.
Some features and benefits of Fabreeka®-LTP Crane Rail pads:
- Improve load distribution and lateral rigidity
- Damp vibration
- Eliminate fretting corrosion
- Relieve girder stresses
- Reduce noise
- Eliminate wear to rail and girder - good wear abrasion resistance
- Reduce rail and crane maintenance
- Unaffected by oil, gasoline and most solvents
- Standard lengths to 25'
- Widths to suit any rail size
- Three types available to cover all service duty categories
- Easy installation
Some practical aspects and considerations when using Fabreeka®-LTP Crane Rail pads:
- The LTP surface conforms to NEMA Grade "C" requirements and vulcanized from an uncured state directly to the Fabreeka® pad
- LTP reinforcement increases lateral rigidity and wear resistance
- Recommended for both indoor and outdoor applications
- Can be placed directly on the runway steel support girder or sole plate
- Smoother and quieter ride for cab operator
Fabreeka®-LTP Properties and Technical Specifications
The LTP surface meets the following specifications: (Check out Fabreeka® pads for the pad portion of the specification.)
| Properties and Technical Specifications |
| Government: |
LP-509
MIL-P-15035 |
| Compressive Strength |
35,000 psi |
| Shear Strength |
11,000 psi |
| Tensile Strength |
10,000 psi |
| Rockwell Hardness (M) |
102 |
| Izod Impact |
2.4 |
| Maximum Operating Temperature |
200°F |
|
Sizes
| Fabreeka®-LTP Crane Rail pad is manufactured in nominal thicknesses of: |
| Types |
Thickness |
Service Duty |
| CR 2-3 |
1/4" |
Light to Moderate |
| CR 17-5 |
11/32" |
Heavy to Severe |
|
Typical applications include:
- Bridge Cranes
- Dockside Cranes
- Equipment Handling Cranes
- Gantry Cranes
- Log Handling Cranes
- Ore Bridge Cranes
- Production Cranes
- Storage Yard Cranes
- Warehouse Cranes
Please contact Fabreeka® to request a brochure.
Please visit our application section to learn more about Fabreeka's® diverse applications.
|
